"Photo by PicPapa"                                                                   

                                             You can join in the racing. Check out www.semra.org for more info.

 

You read right. M&M Racing is going to develop a 2007 Honda CR85. We will post products as we try them.

We will be using the 267mm QTM Inc floating rotor, Brembo caliper, Goodridge brake line, and Brembo 12mm master cylinder.

This is offered as a kit and retails for $599.99. We will be selling them for $575.

We chose the Rad Eagle hub in the natural aluminum finish. We sell these in a set for $400.

The CR85 has lost a few pounds. The first thing to do is build a set of wheels. These are the Cyclone 2.15" x 12" rims on

OEM hubs. We will be using these wheels for rain tires. $95 ea. for rims.

It is starting to look like a Mini SuperMoto now.............

and with body work............

Here is a good look at the 267mm rotor and Brembo caliper.

Now for the most important part on a motorcycle, the suspension!!!! Dave at Ohlins went to work again.

This CR85 shock has custom valving, spring, and length. It retails for $850. There is absolutely no comparison

to the stock shock!!!

Rob at www.minibikesprings.com helped out with this build also. He got us the custom springs we needed to

install in our forks. Dave at Ohlins USA went to work on the valving and length of our forks also.

Rims and Spokes

Click here to go the rims and spokes

Engine Building

We do complete engine rebuilds on single cylinder engines.  Contact us!

Suspension

Click here to go to the suspension page

Wheel Building

We build SuperMoto wheels from start to finish. Hubs, spokes, rims, tires, and tubes

Trackside Support

We are trackside at all of the SEMRA races to support the racers.

Send mail to cam@mmracing.biz   with questions or comments about this web site.
Last modified: 05/08/08